Ski Touring Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY Ski Touring Adapter
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 79
- Makes
- 0
- Views
- 888
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I built a ski touring adapter. The first tests were successful.
I will work on improvements in the future.
You have to print one of each part except for the following parts:
4x fuellung_unten.stl
2x fuellung_oben_vorne.stl
2x fuellung_oben_hinten.stl
The aluminum profiles come from a broken pavilion and have outer dimensions of 20 x 10 mm and a thickness of 1mm. The length of the profiles depends on the sole length of the ski boot. The current adapter variant is unfortunately not adaptable to different ski boots. For screwing together I have used in M6 threaded rods. The brackets are from snowblades / bigfoots that I bought cheap secondhand.
I made a video about the adapter that you can find here:
I look forward to feedback