Weather station for thermal sensor
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: abri_meteo_rail_bloqueur v8_0.2mm_PLA_MK2S_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Home made weather station for your thermometer and/or hygrometer sensor.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 81
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my domotic use, I was seeking how to preserve the external probe from the rude weather.
Oregon Scientific sensors are very difficult to find anymore.
So, I've designed this weather station. You can adapt the inner part for different type of sensor (with some Fusion360 skills).
No glue, no screw, just clips. All parts are difficult to assembly (on purpose) except the top one, in order to be able to change de batteries. If your prints are too loose, add glue. If your prints is too tighten, use some sand paper to adapt the connectors.
All parts should be printed upside down (except the sensor stand). I have added modificators with PrusaSlicer for a better infill (80% density).
You might need supports for the sensor stand ("support sonde" in french) and for the bottom cup ("coupelle basse" in french).