1 / 2
Jolteon - Hueforge 4mm thickness
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Blac
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Overture White Transmission Distance: 4.4
Swap Instructions:
Start with Black
At layer #30 (2.48mm) swap to Red
At layer #33 (2.72mm) swap to Yellow
At layer #46 (3.76mm) swap to White for the rest.