1 / 4
Solis 117 Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tray for a Solis 117 coffee maker that is slightly leaking water.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tray for a Solis 117 coffee maker that is slightly leaking water.
The tray doesn't interfere with the operation of the machine.
Instructions:
Built plate 2 has a pause after the prime line. Remove the prime line and press continue.
- Glue the two pieces together. I recommend scratching the connecting surface with a sharp knife to help the glue stick.
- Sand the inner surface with sandpaper (120 grit for example) to help the resin stick and clean it well. We don't want it smooth.
- Coat the inside with epoxy or acrylic resin to make it 100% watertight.
I used ABS, PETG should also work well. Just make sure your glue is compatible with the chosen material.
The picture is before coating it with resin.