1 / 2
15 Degree Tilting WaveShare 5 Inch DSI Screen Mount For Voron 2.4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount similar to the one provided for the Waveshare 4.3" screen. It tilts between 30 and 45 degrees.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 331
- Makes
- 2
- Views
- 2,517
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
BOM:
Waveshare 5" DSI screen
2 x M2 self-tapping screws
2 x M3*12 BHCS or SHCS
2 x Heatset Insers (M3x5x4)
Print the 3 parts and assemble according to the images. The parts are all in the proper orientation for printing.
If printing the faceplate in ABS or ASA, I recommend printing it with shrinkage set to 100% to make sure it fits snug.
You'll want to really tighten the M3x12 screws to make sure the screen doesn't tilt down when touching it.