1 / 4
Noctua-Turbiter (DEx Edition) v4.5a
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my version of the Turbiter, it is ultra silent with the fan mounted on-top + Fits Noctua NF-A4x20 FLX
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
*Fan should be mounted blower side up so that the airflow gets sucked in through the front and comes out of the top of the unit (See attached pics for an example of how it should look after it is mounted).
**See Pics For How It Should Look Once Put Together!
—> Materials Needed:
- 2x - M3 Hex Female/Female 16mm Standoff (Middle)
- 2x - M3 Hex 20mm Screw (Orbiter v2 Side)
- 2x - M3 Nylon 3mm Round Spacer, Not Threaded (Turbiter Side)
- 2x - M3 Hex 10mm Screw (Turbiter Side)
- This mod is intended to be used with the Noctua NF-A4x20 FLX:
https://www.amazon.com/dp/B072JK9GX6?ref=emc_s_m_5_i_atc