Home Assistant Voice Control Housing
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.73 – €3.34 net (excluding VAT)
For file: Voice_Assistant v13_Base_0.3mm_PLA_MK3S_2h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.04 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 2.51 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Custom housing for components needed to build local voice control for Home Assistant.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 1,020
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
If you are venturing down the Home Assistant local voice control rabbit hole, I wish you good luck. My hope is that this model may save a little time if you want to throw all components into simple housing. There are two versions.
- v3: Simple, inset lid. Likely requires glue to hold in the jumbled mess of wires. I included a gcode file of v3 with an earlier version (since enlarged lid holes)
- v4: ATTEMPT at creating a threaded version of v3… to more aesthetically hold in aforementioned jumble of wires. As of model posting, have not printed to confirm tolerance of threads (used specs that worked on similar model).
- v13: Threw out threads and simple inset for a quarter turn/lock design. The full thread (v4) ended up disconnecting all the soldered wires. This version requires only about a quarter turn of the lid to lock into place.
Also, if you're interested in the parts:
- Speaker
- ESP32 WROOM
- Amplifier
- Microphone
- WS2812B LED
I followed this HA + ESPHOME tutorial: Smart Home Circle