1 / 2
Easy to Print Filament_Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
easy to print filament holder fast print
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, I made a new filamentholfer, because i changed my printing setup.
It is easy and fast to print. You need 2 of them.
Printing:
- 0.3mm Layer
- 40 or 50% Infill
- no top or bottom layers
- 3 or 4 outside layers
You need a woodstick of 20mm and 6 little screws. It is possible to glue the parts together. MAde with PLA but you can also use PETG.
Print time for both ~3hours.