Single Motor Steerable Robot Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a single motor 2 function remote controlled toy robot. It can move forward or spin in place for steering.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Demo video: https://youtu.be/S0UYIXznOb0
Build video: https://youtu.be/A49zsG_WUeo
This is a single motor 2 function remote controlled toy robot. It can move forward or spin in place for steering. I have designed similar robots in the past but this one is simpler to build. It is controlled by the transmitter and receiver from a Coke can RC car. It uses a yellow TT motor with dual shaft output. It is powered by 2 AAA batteries. The hardest part of the build is the electronics.
The main_body has a sacrificial bridge that needs to be trimmed out. The head is glued to the Main_body. The inlay parts are glued to the main body so they can be printed in different colors. The grill is glued to the main body. The grill is printed with a layer height filament change so it can be 2 colors. The parts that have to turn freely on 3mm screws will probably need to be drilled out with a 3mm or 1/8 inch drill. The 3mf files are Bambu studio project files.
Hardware needed:
Coke can RC car
The hardware required is 3MM screws of various lengths: https://www.amazon.com/gp/product/B08LVT7Y8R/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1
O rings from Harbor Freight O ring Kit:
Tires #214: ID 24.7MM, OD 31.7MM, Section 3.5MM
Floating idler tensioner #006: ID 2.8MM, OD 6.6MM, Section 1.9MM
2AAA battery box
Yellow dual shaft TT motor
2 red 5MM leds
2 resistors in the 100 - 200 Ohm range
4 magnets 6MM X 1.5Mm
Category: Mechanical Toys