Apple II Floppy Emu Enclosure (][, ][+, //e)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for BMOW's Floppy Emu
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 60
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To create the light pipes to bring the LEDs' light to the front, use a piece of transparent filament. Melt one of the extremities to create a transparent dome (I used a hot air soldering station, but a lighter works too) and fit the filament in the hole, cut it to size, and glue it in place with a drop of super glue (or melt the other side with a soldering iron).
The box is held closed by four 2.5 mm x 12 mm screws.
The filament I used for the top part is eSun ePLA-Matte Light Khaki that almost matches the famous Apple beige (#C2BDB0).
The bottom part is PolyMaker PolyLite PLA Dark Gray Green.
The buttons are printed using some random light brown filament I had lying around.