1 / 7
6 Piece Small Vise
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small vise that consists of only 6 pieces and everything is 3D-printed
- Rating
- 4.75 / 5
- Likes
- 169
- Downloads
- 204
- Makes
- 4
- Views
- 1,735
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is simple Small Vise that does not need any metal bolts :)
I was inspired by this print a while ago
https://www.printables.com/model/53471
And wanted to make one that was a little larger and did not need any metal bolts/nuts.
If you are going to print this I suggest you do 3 Perimeters and set it to 40%+ infill and use gyroid infill
Also you may need to put a little grease on the enclosed axle. I just put a little bit on each side and worked it in and it stopped all the squeaking I was getting :)