1 / 2
Filament guide for abrasive materials (carbon fiber) - neptune 4/3 pro/plus/max — image 1
1 / 2

Filament guide for abrasive materials (carbon fiber) - neptune 4/3 pro/plus/max

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Guide for abrasive filaments to retain slight resistance on spools to they dont unwind

Rating
0 / 5
Likes
3
Downloads
22
Makes
0
Views
500
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I've been printing a lot of carbon fiber PLA/PETG/ASA and I was worried about wearing out my filament sensor so I made a replacement with a hardened bushing in it.

You will need:

1 - 5/16 x 3/16 x ¾ hardened bushing

https://www.mscdirect.com/product/details/07005150

 

You need to make a pause in you slicer to install the bushing. mine was at layer 111 with .2 layers. The slicer will say there is a cantilever, but that is just the designed support so you dont need actual supports. 

Tags