1 / 2
Vent Brace for 50mm Internal Diameter (ID) Tubing / Piping
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vent Brace for 50mm Internal Diameter (ID) Tubing / Piping
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Standard Digital File License
Vent brace for 50mm internal diameter tubes or fittings. Designed for use with 60mm external diameter fittings, as this leaves the brace flush with the tube.
Two parts: external fitting and internal ring.
Designed to be used with 0.5mm mesh.
- Print both parts
- Cut a 47.5mm (approx) diameter circle of 0.5mm mesh
- Apply a small amount of superglue along the inner ring of the external part and wait to dry.
- Insert internal ring into the main part. This will push fit and can be removed if required. If a permanent solution is required, please apply superglue to this part also.
Originally designed for use in a leaf cutter ant setup.
