Sealable Storage Capsule
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sealable Storage Capsule
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 90
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
Bottom internal dimensions are-H 176mm, W 94mm. Underside of the top is-H 44mm, W 75mm. Overall internal height from the bottom to the underside of the top is 220mm.
I recommend purchasing 3mm round foam seal from your local hardware store or online for the seal groove of the bottom, measure and cut to length and superglue in place. Otherwise I have also included a TPU seal file for those that are capable of printing flexible filament successfully on their printers. When placing the TPU seal in the groove just make sure that the flat part is facing up towards the top:)
I originally designed this model for my boating needs. I needed something I could put my valuables in to keep dry and just in case things went awry my phone and wallet and keys would be safe and most importantly float and be easily visible. For this reason I would recommend printing it in a hi-vis colour like orange etc.
If you plan on printing it as a boating capsule I would recommend these print settings. 4 perimeters/walls with 15% lightning infill. Then pause the print @170mm on the bottom and fill the cavity of the capsule with silica gel beads as an added water ingress insurance policy.
No supports are required.
Happy printing.