1 / 5
Mammoth Skeleton 3D Puzzle Kit Card
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.54 – €1.88 net (excluding VAT)
For file: mammoth-kitcard_0.4n_0.2mm_PLA_MK4IS_1h30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.71 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.49 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
FDM friendly remix of jtronics laser cut model. Optimized for color swap and tight friction fit.
- Rating
- 4.5 / 5
- Likes
- 151
- Downloads
- 707
- Makes
- 4
- Views
- 1,981
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- GNU General Public License v2.0
FDM-Compatible Remix of the Laser-Cut Version by jtronics
- 19 Pieces
- 20 x 20 cm Kit Card version suitable for gifting
- Non-Kit Card version for personal printing and easy scaling
- A straightforward color swap is possible after half of the layers to print
Scaling
- Keep in mind that friction fit of the parts depends on the z-height. When scaling, ensure that the print's z-height is a multiple of the layer height to ensure a proper fit.
The model is designed for 1.6mm z-height.
0.8mm up to 2.2mm z-height are tested and PrusaSlicer 3mf project files are attached.
2.2mm being the largest scale possible to arrange on a MK4 build plate.
- Size of the finished Puzzle at given proportionally scaled z-height :
Kitcard
1.6mm = 170 x 120 x 60 mm
Only-Parts
0.8mm = 85 x 60 x 30 mm (Absolutely needs glue for the ribs)
1.0mm = 106 x 75 x 38 mm (Possibly needs glue for the ribs)
1.2mm = 128 x 90 x 45 mm
1.4mm = 149 x 105 x 53 mm
1.6mm = 170 x 120 x 60 mm
1.8mm = 191 x 135 x 68 mm
2.0mm = 213 x 150 x 75 mm
2.2mm = 234 x 165 x 83 mm
Print Advice:
- Print Speed & Bed Adhesion:
Print the first layer at a maximum speed of 20mm/s, ideally lower. Some parts still contain rather sharp and small details. The Kit Card version can assist with bed adhesion if the only-parts version presents issues.
- Print Bed & Color Swap:
All puzzle parts are oriented so that the outward-facing side of the model is the side touching the print bed. This ensures that a color-swapped print always displays the same color on the exterior. This might be an opportunity to showcase your fancy holo or patterned bed.
(Note that some HiH and other visually striking beds specify a maximum first layer temperature of 200°C.)