1 / 6
VRS DirectForce Pro Wheel Base Power Switch and E-Stop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remote power switch and E-stop for the DirectForce Pro Wheel Base
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 688
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Be careful when pressing the M3 nuts into the base plate to prevent it from cracking. Softening the stubs with a heat gun helps.
Connections:
- Pins 1 + 2: E-Stop (NC – opens when pressed to stop the FFB)
- Pins 3 + 4: Power (NC – opens to turn on the wheel base)
Hint: As the power switch must be used as NC and needs to be in the “off” position to power the wheel base and the switch's thread is keyed, you need to file off that bit of the cap's plate so it can be mounted reversed.
Additional Parts list:
- RJ45 network socket: https://www.aliexpress.com/item/1005006034143433.html
- 22mm aluminium emergency switch: https://www.aliexpress.com/item/1005004953423564.html
- Toggle switch with cap: https://www.aliexpress.com/item/1005006279244589.html
- Wires (sockets and plugs as shown in the photos recommended)
- 4 M3×12 bolts and nuts
- 2 M6×16 bolts and slot nuts
- Ethernet cable