Knobs For Radio(s)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.25 – €0.31 net (excluding VAT)
For file: Radio-Knob-No-Bolts_20m53s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.28 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 21 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are Knobs for my JoyingAuto Radio that resemble my HVAC Knobs. 3 Different Variations are available.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 53
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Theses Radio Knobs are a resemblance of my HVAC Knobs for my JoyingAuto Radio. I love how my HVAC Knobs look and wanted the same for my radio instead of the existing Chrome Knobs. 3 different variations were made for different style choices. The Knobs do have a very snug fit on the Knob Shafts based on the dimensions of my Radio so they will not wiggle off, as well as a notch to prevent the knobs from spinning separate from the radio knob shafts. The notch is slightly raised from the bottom to have a more flush look.
Any suggestions? Please let me know in the comments!
- Basic Print Settings
Material: PLA
Layer Height: 0.10mm
Infill: 25%
Support: YES
- Dimensions
Height: 9mm
Diameter: 16mm
- Shaft Socket Dimensions
Diameter: 6mm
Knob Shaft Notch: 1.5mm off of Diameter
Depth: 5.67mm
Notch Depth From Bottom: 0.72mm