"Silly Stands" Blaster Display Stands for Talon Mag Geometries (Straight, Angled, Slim Angled/Nightingale)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nerf blaster display stands for blasters using the Talon magazine geometry variants (Straight, Angled, Slim Angled).
- Rating
- 5 / 5
- Likes
- 108
- Downloads
- 706
- Makes
- 9
- Views
- 2,085
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The “Silly Stands” are Nerf blaster display stands for blasters using the Talon magazine geometry variants (Straight, Angled, Slim Angled)!
There are 6 versions. There are three types of mag (Straight Talon, Angled Talon, and Slim Angled Talon/Nightingale). Each type of mag has two versions, with the bottom “shoe” of the stand facing forward or backward.
Choose the version that will work best for your blaster's weight balance!
Printing
I recommend you print all these parts at 5 walls, 20% infill.
If you have poor bed adhesion/warping, a brim might be necessary.
Assembly:
Print the stand you like, and print the printed reinforcement bar.
Drip some glue into the hole on the bottom of the stand while holding it upside-down, then push in the bar all the way until it's flush with the bottom of the stand base.
Then place it somewhere where glue can drip safely while the glue dries.
Donations & Merch
If you like what I do, please consider supporting me!
I don't charge for my files, so any donations or merch purchases would be greatly appreciated!
- Patreon (Monthly donations)
- Buy Me A Coffee (One-time donations)
- RedBubble My merch shop, full of fun Nerf-y stickers and shirts!
Note: Thanks to Ice086 for recommending I call these “Silly Stands”!