1 / 1
XIAO Sense case 2x5mm LED mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for adding LEDs to the camera case.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 126
- Makes
- 0
- Views
- 657
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a quick mount for adding LEDs to the camera case.
I used two 5mm white leds in parallel with some presoldered resistors, no idea of the value but should be easy enough to look up for anyone interested.
Added female JSTs to the ends for ease of hooking it to the 5v output on the board which has had a header soldered on the side that outputs volts and has the ground.
Sanded the bulbs on the LEDs to diffuse light and secured the LEDs with a drop of super glue each.