1 / 1
Shorter version to prevent collision issues (43mm base instead of 47mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevents collisions with vase+sequential printing, allows more models on plate for K1 max at once.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 1
- Views
- 237
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Shorter version, 43mm to fix collision issues. No z-resize, it was cut and 4mm were removed.
K1 max has 45mm distance between the nozzle tip and lower rod (see slicer config for your printer). The original model is 47mm. This means when printing vase+sequential the model will collide against the lower x-rod if you have 2 next to each other. So you are limited to 3 pieces per plate (1 per row).
This version is 43mm and fits under the rod, you can have 9 on your plate without collisions. In case you need many :-)