BTT HDMI5 v1.1 Screen Mount for Tenlog TL-D3 or 151mm hole mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for HDMI5 v1.1 screen for a Tenlog TL-D3 printer/ a surface with two screw holes 151mm apart, 35 degrees canted.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 498
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
An external mount for BTT HDMI5 v1.1 screen for a Tenlog TL-D3 printer/ a surface with two screw holes 151mm apart, 35 degrees canted from the surface.
You can use the original screws for the Tenlog TL-D3 to mount this.
This sits over the OEM Screen.
My screen is running off of a BTT Pi v1.2 as the MCU, which is connected to an Octopus Pro v1.1 main board. If you are using a standard Tenlog Board, make sure you can use the connections before assuming that just because I did, that you will be able to, too.
