Checkered Cake Ring Mould
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.76 – €0.93 net (excluding VAT)
For file: Beam_0.2mm_PLA_MK3S_52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.84 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 52.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use this to easily make your own checkered cake!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simply place the assembled rings into your cake tin, pour mixture with alternating colours into it, remove, and then bake your cake. Repeat to create several layers and place cakes on top of each other.
The rings are 71mm in height, I have included a lower version (40mm height) which I found were of sufficient height and easier to pour mixture into.