Toothpick dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dispenser for 80mm x 2mm toothpicks or 3.5'' x 2.4mm toothpicks. Single ejected.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 419
- Makes
- 3
- Views
- 4,537
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Dispenser for 80mm x 2mm toothpicks or 3.5'' x 2.4mm toothpicks. The container offers space for up to 350 toothpicks. Single ejection mechanism.
Additional parts: spring 10mm x 4.5mm, paper clip
Edit: As requested, I added a version for 3.5'' x 2.4mm toothpicks. All parts can be found in the single file "Toothpick Dispenser 2.4mm.stl".
See the dispenser in action: https://youtu.be/vM8a74EjuLA
Assembly
(1) Insert box into base frame by bending the back bracket carefully.
(2) Insert spring (10mm x 4.5mm) into hole
(3) Insert ejector into guide groove
(4) Insert box into front brackets by bending the bracket carefully.
(5) Shorten the paper clip and bend it as shown in the picture. The distance between the holes in the ejector and the base frame should be approximately 10 mm.
(6) Insert seperator. The beveled edge must be at the bottom and point into the inside of the box.
(7) Don't forget the toothpicks :-)
