WordClock 2024/2025 desk holder/stand (16x8 & 16x16)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WordClock 2024/2025 desk holder/stand (16x8 & 16x16)
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 178
- Makes
- 4
- Views
- 677
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Desk holder/stand for all WordClock 2024/2025 (16x8 and 16x16) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =)
With the shown big printed screw you can adjust the angle as you like.
The holder/stand is mounted to your WordClock with the lower 2 screws of the lid that originally were supposed to be used as wall mount distance gap only.
If you fold the foot part down, the holder can prevent the flat standing WordClock from tipping over.
Additional hardware needed to avoid the need of any support used during printing:
- 2x M4x20 screws to mount the “base” part to the “arm“ part.
Printing instructions:
- 0.3 draft profile
- No supports needed
- No brim needed
- Textured sheet used
Happy printing =)