StageTop Elite Rail Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage case for StageTop Elite Rails
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 1
- Views
- 270
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
The StageTop system has some great storage options, but none for the Elite Rails. So I've gone ahead and made one, based on the original rail carrier but widened for the Elite rails and with slots for the Elite clips.
I have a Voron 350 so I built it as a single unit holding 4 pairs of rails. My table is a little larger so two of these hold all my rails. If there's demand I could look at making a split version for smaller beds, or you could cut it and glue it.
I printed this in Bambu Matte PLA at .28 layer height and 10% gyroid infill. Recommend a 10mm brim.
PS StageTop gang - love what you do, and look forward to you producing a real version of this.