1 / 4
ADS-B Antenna Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for holding a simple 1/4 wave ground plane ADS-B antenna
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 81
- Makes
- 2
- Views
- 1,167
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a basic stand for holding a ¼ wave ground plane antenna for 1090 MHz ADS-B reception.
Stand consists of a main body to hold the antenna with slots for the four ground plane legs to sit inside of, and then four legs to attach at each corner.
Legs are held on using M3 screws & nuts. M3x12 minimum
Ground plane leg slots are made to hold 2.75mm diameter wire (LMR400 coax core)
Antenna was built using a panel mount N connector, ring terminals, and the inner core of LMR400 coax