1 / 1
KP3S Pro Z-Axis Knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model to help with manually moving the z axis on the kp3s pro
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 63
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Installation:
- remove the bearing and the screws holding it
- move the z axis until it hits the top
- thread the knob until it stops turning
Printing
you can print the gcode, open the project file (3mf) in orcaslicer, or copy the settings into your slicer from here.
the best way to print this model is with a 0.4 nozzle and a height range modifier.
height range changes the layer height for the top part to print the threads better.
- Height Range Modifier: 0.12 layer height, 16.5 to 26mm
- Layer Height: 0.2mm until height range modifier
- Infill: 20%
- Perimeters: 3