Giant 11x11 Ball

Here's a video of me making this, which will be a helpful reference.

IMPORTANT PLEASE READ BEFORE TAKING ON THIS PROJECT

• Print the core in PETG. PLA is probably not strong enough
• The rest of the parts can be printed in whatever material you want
• Use a 0.8 nozzle
• Use M8x60 screws
• The small center parts don't need infill
• The wing files require mirrors. I don't have mirror files, so use your slicer to mirror the wings
• 2kg of each color was exactly enough for me, but if you mess up too many prints or use more infill than I did, then it'll probably need 3 rolls
• I don't know how much filament the core used, but probably 2 rolls max
• You need to superglue wings, centers, edges, corners, and core, so superglue and rubber bands for all those. Epoxy the core to be safe
• This might be a challenging build for some people who are new to puzzles and 3d printing. I don't want to be responsible if it goes badly - it went fine for me though. So print at your own risk. Actually, on second thought, just don't print this

Here's the center numbering scheme: