Pokemon Main Line Display Case

This is my design for displaying Pokemon Games. This was a long Project for me.  Please let me know your thoughts or questions.  

Design Notes:

• Each Section is designed to hold 2 of each game in case you end up with an extra Like I did. It also allows for storing some special Editions or Custom Cartridges. 

Printing Instructions: 

• I have added my Bambu Labs Painted File to this if you want to skip the instructions (or Suggestions)
• Printer settings:
  • Infill: Cubic 20%
  • Walls: 3
  • Top Layers: 5 or 6
  • Bottom Layers: 3
  • Support Settings: Standard Normal Style (I change the Top Z-Distance to .05 or .01 to create a better pocket for the Games)
• Print Orientation: Back Down such that the Pokemon Outlines are pointing up
• Filament I Used: 
  • PolyTerra Black for the Outlines and Lettering
  • PolyTerra White Marble for the rest
• Suggested Painting:
  • Pokemon Outlines:  I Painted the entire bottom MM
• Fit and Finish: 
  • These Print fairly well but can sometimes have some roughness around the Pokemon outlines and Lettering due to the intricacies of the shapes. To Fix that do the following:
    • Use 400Grit Sandpaper to smooth out the roughness
    • Use Canned Air or something similar to clear the excess dust created
    • Then use a torch to carefully brush over the surface to remove any stringing or hangers left on the print
    • NOTE: I used 400 Grit sandpaper to smooth most of the prints the torch does a good job of finishing the process; however, be careful with the torch it is easy to ruin a print. 
• Additional Parts Needed (If you want to Match My Display): 
  • Glass Door Shadow Box:  https://a.co/d/gNpWO0K
  • Screws:  M4x12 wood screws
    • I used some from a Set of 304 Stainless Screw I keep for Projects: The set I own doesn't seem to exist anymore…
      • Standard Size: #8x1/2 Wood Screw
      • I bought mine from Vigrue on Amazon. they seem to make quality products.
• Building Notes:
  • The screws get screwed into Foam.  Do not Overtighten as they will just rip through the backing. 

I am happy to answer questions and help with whatever I can. If you find an issue with a design, let me know and I will edit and reupload when I can!

I hope everyone enjoys the Design and Display!