1 / 1
Surface Go Wall Mount Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a case to wall mount a surface go
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 204
- Makes
- 0
- Views
- 1,427
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
wall-mount for a surface go. I used this to make a Home Assistant terminal.
Printing:
I used PLA at 20% infill. you should not need any supports
Assembly:
you will need 4 M3 threaded inserts, 4 M3X16mm screws, and some way of attaching it to the wall (I used drywall anchors).
First insert the threaded inserts. Next attach the backplate to the wall (I only used the top 2 anchors). Next align the front plate and screw in the bottom 2 M3 screws. Next insert the surface into the top slot. Next screw in the top two M3 screws.