DIN Rail Keystone Panel
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.56 – €1.90 net (excluding VAT)
For file: keystone-panel-6ports_0.4n_0.2mm_PLA_MK4IS_1h20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.73 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 1.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
DIN Rail mounted keystone panel usually for managing ethernet cables.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 438
- Makes
- 2
- Views
- 2,845
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Check out this simple to use keystone panel that you can mount on a DIN rail. You can put it up so it faces up or down, but putting it down makes it easier to work on. It's super useful for keeping Ethernet cables tidy, especially in an electrical panel like the Hager one shown in the photo.
What you need to assemble
M3x12 screw (4x)
DIN Rail mounts (2x)
Keystone panel
Print settings
Filament: PLA
Layer height: 0.20mm
Nozzle: 0.4mm
Infill: 15%
Supports: None (Print on the ports side)