Simple Bilby Magnet or Ornament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple magnet design for Creatrix Britt's the 3DP Easter Bilby Project.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 1
- Views
- 77
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
This simple magnet design celebrates the bilby, an adorable and endangered marsupial from Australia. This was designed for the 3DP Easter Bilby Project (spearheaded by Creatrix Britt) to raise awareness for the Save the Bilby Fund https://www.savethebilbyfund.org.au/
You can make the design come to life with layer swaps.
0-3mm - Grey
3.0mm - 3.4mm - Pink
3.4mm - 3.8mm - White
3.8mm - 4.2mm - Grey
4.2mm on - Black
In PrusaSlicer, you would be putting Color Changes at 3.2, 3.6, 4.0, 4.4.
Once printed, you can affix a magnet to the back. You can also mirror the model and print a second one to place two back to back as an ornament.