Temperature-Tower
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.57 – €1.92 net (excluding VAT)
For file: Temptower_example_PETG_V0.4_0.2mm.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 2.03 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Full adjustable temptower.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 534
- Makes
- 2
- Views
- 2,254
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
To adjust the temp tower you can use the py-script.
https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment
Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height.
If you use Prusaslicer, you can insert the following custom gcode at the end at Printer settings > Custom G-code > Before layer change G-code.
M104 S{start_temp - int(temp_increase * int((layer_z - height_base) / temp_level_height_in_mm))}
Change start_temp, temp_increase, height_base and temp_level_height_in_mm to the settings you need.
example:
M104 S{230 - int(5 * int((layer_z - 1.2) / 10))}