Fishing Reel Spooler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Same as the Original but with 3D Printable Hardware
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 229
- Makes
- 0
- Views
- 2,253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Someone commented on my make of the original asking for the files I used from my make. figured if one person asked there probably going to be more. So I decided to make a remix
Model is exactly the same as original just w/3D printable hardware
On the Base of the Spooler you can use the shorter metric bolts from the the file “M6 Bolts” they are the recommended size from the original model. However, I found that only on the base; These were too short. So I designed a 18mm one as well. Print two of them for the Spooler Arms portion of the Base.
The Cap Head Screws are Philips drive. I heated my screw driver up with a lighter and pressed it into the screws so that they could have an exact imprint of my size Philips. Makes the screws thread on very easy.
Ill also put a nut that threads onto these bolts as well should you wish to have these files for a different application or just test the bolts before you screw them onto the actual model.