1 / 4
Urban Arrow Under Seat AirTag Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A discrete AirTag holder, utilises the pre-drilled holes under the seat of the Urban Arrow Family. No supports.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 134
- Makes
- 1
- Views
- 1,059
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is my first ever 3D printing model and I am rather proud.
I noticed the other AirTag holder on Printables was far too discoverable for my liking. My previous solution to duct tape an AirTag under the seat eventually failed and the device was thankfully found on the garage floor.
Slicing clues:
- No supports needed
- Snap the two flat outer edges to the bed
Items:
- 1x AirTag
- 1x Screw - 12G x 25mm as pictured
- The drilled hole is 4.9mm
- 12G x 25mm is available from Bunnings in Australia, 6 for $4.90
- Please comment if there is a more suitable international standard
Steps to install:
- Unbolt the 4 hex-head bolts with an allen key to remove the seat from the cargo box
- Place the AirTag in the printed holder
- Screw the holder in place, I aligned it to the pole so it was supported
- Return the seat and bolts, tighten and ensure everything is safe.
Happy riding!
