1 / 1
Over / Under Extrude Cube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hollow cube to test if the extruder settings are under or over extruding
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This model is to test if the extruder settings are causing over or under extrusion.
Walls are 0.4mm
After printing measure the walls.
Note: A tolerance of (±0.02mm - ±0.05mm) is normal.
- Less than 0.4 outside of tolerance, might indicate under extrusion.
- More than 0.4 outside of tolerance, might indicate over extrusion.