1 / 4
Elegoo Neptune 4/Pro Fan Shroud V5 with Beacon/Cartographer mount (holes widened for heat set inserts) — image 1
1 / 4

Elegoo Neptune 4/Pro Fan Shroud V5 with Beacon/Cartographer mount (holes widened for heat set inserts)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of Shadow-Dancer's remix of the 3x5015 fan printhead with beacon mount adjusted for threaded insert

Rating
5 / 5
Likes
36
Downloads
107
Makes
1
Views
2,841
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

See: https://www.printables.com/model/813810-elegoo-neptune-4promaxplus-fan-shroud-v5-with-beac for details. Only difference is that you can use heat set inserts to mount the beacon rather than screwing directly into the plastic

Additional materials not included with Elegoo printhead:

  • 12x M3 threaded inserts (I used M3x4.0mm with a 4.6mm outer diameter)
  • 6x M3x20 machine screws for fans
  • 4x m3x5 machine screws for mounting beacon and LED (+another 2 if you mount an ADLX345 as well)

Print settings:

  • Wall count: 2
  • Wall generator: Arachne
  • Supports: Manual tree supports (See screenshot attached for positioning)
  • Material: Overture Orange ASA
  • Infill: 10% cubic

 

Still sorting out beacon configuration, will add to description when it's working consistently