1 / 10
WALLET WITH SUPPORT FOR APPLE AIRTAG
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Card wallet Holds 6 cards and Apple Airtag
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 40
- Makes
- 1
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Print at layer height 0.2 with 3 walls, 5 top and 4 bottom layers and 15 - 20% grid infill.
I recommend printing the Middle section, Card pusher and Lever in PETG for its flexural strength . The top and bottom sections will be fine using any type of filament.
You will need
- 4 M3 x 12mm bolts
- 4 nuts M3
- 3M3 x 5 mm bolts