1 / 1
Drainage pipe overflow section w/ removable debris guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An overflow module for your drain pipe for if the water cannot flow down fast enough or gets backlogged
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a useful model for an overflow segment of a drain pipe. It comes with a removeable debris guard and requires minimal assembly. It can be used outside in case the water in your drain pipe gets backlogged or cannot handle the water. It is also helpful if the drains are blocked.
Before Printing:
- The model by default has a 10mm pipe. Scale it up in your slicer to fit your pipe size.
- Make sure to print supports for both parts of the model
- Print this model with ASA filament for high UV, heat and rain resistance. Other materials may melt, discolour, or have water seep through
Assembly:
- remove the supports
- slide on the debris guard
- glue or weld the pieces together
- (optional) add some mesh between the funnel and the debris guard to help prevent foreign materials from entering your pipe
- attach to somewhere in your pipe system
If you print this model, please let me know how it went and what settings you used. Thanks!