Hat Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.87 – €3.51 net (excluding VAT)
For file: Hat Stand Base_0.4n_0.2mm_PLA_XLIS_2h14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.19 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 2.23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hat stand designed for Akubra-shaped hats (but will work for almost any hat)
- Rating
- 4.333 / 5
- Likes
- 48
- Downloads
- 616
- Makes
- 2
- Views
- 2,662
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a hat stand for my Australian “Akubra” hat. The hat deforms quickly if stored on a flat surface.
Using Harry_D60's design from Thingiverse as inspiration (https://www.thingiverse.com/thing:3065011), I designed a two-part hat stand that can be printed without any support material. The two parts simply screw together with the coarse printed threads.
I printed my first one in Copper PLA (probably not quite the look I was after - but oh well!):
- PLA or PETG will work just fine,
- 0.2mm layer height, but layer height is not critical,
- 2 perimeters
- 15% infill (grid - but just about any of the usual non-flexible patterns would suffice),
- no support material required,
- no skirts or brims,
- 5 top layers and 4 bottom layers (my slicer defaults).
I printed on my Prusa XL. I've included a print file for that, as well as print files for the individual parts (Base and Ring) for those who have trouble fitting the two parts on their print beds.
I've included 3mf and STL files of the Base and Ring, as well as STEP files if anyone wants to fool around with them. The “Hat Stand Print” 3mf file is both parts laid out on a Prusa XL Printer.