Bambu A1 hotend FLSUN SR LGX lite direct drive with Effector House
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Direct drive for FLSUN SR with removable Bambu A1 hotend and LGX lite or HGX V2 extruder.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 131
- Makes
- 0
- Views
- 1,476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Direct drive for FLSUN SR with the removable Bambu A1 hotend and LGX lite or HGX V2 extruder. Subject to changes!
Original 4010 fans can be used
Adapters for two 5015 fans
Updated adapter for CPAP
3010 Fan for hotend heatsink
Insert the end balls under pressure into the effector-house ensuring that they reach the stop
Use a small piece of Teflon tubing between house and extruder
Two versions effector-house. With or without M3 Brass nuts inserts
Holes mount for Fysetc ADXL345 accelerometer
To dismantle and assemble the hotend, dismantle the ductshield, remove the lock and use your finger to rotate 45 degrees and extract!
Short video test:
Total Weight:
255g with 4010fan
300g with 5015fan
262g with CPAP
Print Setting:
0.2 layer (0.16 for Ducts)
Supports Yes, only Build plate
20% infill
Best ABS or ASA