1 / 1
2.5" SSD/HDD Handle for Slide in Drive Systems
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple handle with screw holes for easy gripping of your SSD/HDD.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 2
- Views
- 255
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
What it is:
A simple handle with screw holes for easy gripping of your SSD/HDD.
Printing Instructions:
IMPORTANT: MAKE SURE YOU MEASURE THE THICKNESS OF YOUR SSD/HDD. Two options are provided 7 and 9mm thicknesses.
0.2/0.3mm Layer height is OK. Print without supports. Brim is optional. Print with flat side down.
SSD Installation:
Use either longer than normal SSD screws or double sided foam stick tape.
If you are using double sided foam stick tape, make sure to apply it to the SSD first, then push the SSD into the Handle.