Tenda TEG1005D Swich Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.65 – €3.24 net (excluding VAT)
For file: Tenda TEG1005D Holder__0_0.2mm_PLA_MK3S_3h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.94 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 3.03 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Holder for the Tenda TEG1005D to mount in walls, your pc, under desk, etc...
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A quick model i made to hold my Tenda TEG1005D on the side of my computer.
Just print the 2 parts, glue them after aligning them with the pegs and use some double sided to stick it where you want it.
Tolerances are tight so it holds the box in place so be careful if your printer is not precise.