The Witcher - Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.31 – €7.71 net (excluding VAT)
For file: Witcher_Front_200x200_0.4n_0.08mm_PLA_MK4IS_7h31m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.01 excluding VAT (range midpoint).
- Weight reported by the author
- 77 g
- Print time reported by the author
- 7.52 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Witcher - Hueforge
- Rating
- 4.5 / 5
- Likes
- 14
- Downloads
- 66
- Makes
- 2
- Views
- 589
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Basico Control3D Black
PLA Sunlu Meta Grey
PLA+ Esun Bone White
PLA Basico Control3D White
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Grey
At layer #20 (1.68mm) swap to Bone White
At layer #25 (2.08mm) swap to White for the rest.