1 / 1
Chenbro RM42200 radiator mount drill guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this tool to ensure that you drill the mount holes in the correct location
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This guide will work with BoA's model or my Remix.
I suggest mocking up the radiator and mount assembly and moving in into place to determine the correct location.
Mark the location with a sharpie and remove the radiator assembly.
Clamp the drill guide in place with a c-clamp or similar.
Ensure that alignment is correct and guide is square.
Drill the holes through the guide.
For M3 screws, a 3.5mm drill is reasonable.
Deburr the holes and countersink the outer side.