YAEE -Yet Another Easter Egg
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.40 – €0.49 net (excluding VAT)
For file: Osterei_18_0.4n_0.2mm_PLA_MINIIS_29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 28.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Colourfull Small Easter Egg, easy and fast to print / Farbenfrohes Osterei, schnell und einfach zu drucken
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 86
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Easter means joy, so the easter egg should be colourful!
Printing instructions
- Print with a colourful Material, I used Geeetech Silk Red-Purple-Gold for it.
- Set spiral vase mode
- Set your line width to 0.6 mm for a 0.4 mm nozzle
- Set 5 bottom layers
- Use concentric infill for bottom layer
Happy Easter!
------------------
Ostern bedeutet Freude, also sollte auch das Osterei schön bunt sein!
Druck Hinweise
- Zu drucken mit einem farbenfrohen Filament, ich habe Geeetech Silk Red-Purple-Gold benutzt.
- Den Spiralvasenmodus aktivieren
- Die Extrusionsbreite (Linienbreite) für eine 0.4 mm Düse auf 0.6 mm stellen
- Für den Boden 5 massive Schichten einstellen
- Das Bodenfüllmuster auf Konzentrisch stellen
Frohe Ostern!