1 / 5
Self-leveling cup holder for TFK stroller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print-in-place gyroscopic balance system and anti-vibration springs will protect your cofee during walks with your baby.
- Rating
- 4.619 / 5
- Likes
- 1,094
- Downloads
- 3,400
- Makes
- 21
- Views
- 22,878
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction.
Dimensions
Inner diameter of the holder is 75 mm. The diameter of the handle should be around 22 mm.
The holder must be attached to the handle with four screws M3x25mm.
Printing
I recommend using PETG, because it provides good flexibility for the springs and seems to be sufficiently durable. No supports needed.