Guten 70l SmartPID housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
m3x15 button bolts w 2 washers & 1 nut, for outer holes m3x40 button bolts w 4 washers & 3 nuts, for center holes…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
m3x15 button bolts w 2 washers & 1 nut, for outer holes
m3x40 button bolts w 4 washers & 3 nuts, for center holes
Remove rubber feet from SmartPID and align bracket so that protrusions fit where rubber feet were.
The PID is designed to pressure fit into the faceplate and use the the two extra nuts on center bolts to lock in place. The last nut on the center bolts locks the faceplate to the Guten
I added some silicon:
- between faceplate and guten SS
- around bolts
- at interface of SmartPID and faceplate
FDM
Use ABS or another temp tolerant plastic and orient face up with outer edges touching the build plate. Use supports
RESIN
"Sirya Sculpt" resin works well and can handle temps >100C. Use attached resin STL with supports already added
Model is available publically at Onshape
Category: Engineering