Philips Hue Play Wallmount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Great wallmount that mounts to the original hole under the play device. Easy print optimal for PETG or PLA
- Rating
- 4.333 / 5
- Likes
- 55
- Downloads
- 367
- Makes
- 4
- Views
- 3,926
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Philips Hue Play Wallmount
Great wall mount that mounts to the original hole under the play device.
The base is tilted about 65 degrees to give a softer light on the wall than the original.
It puts the play 70mm from the wall and attaches to the original mount hole under the play.
Printed in PETG with 40% infill for extra strength although probably overkill since the device is so light (no pun intended).
PLA works just as well and gives a more stiff mount.
Updated version (v01.2) with some reinforcement to the 90 angle if you feel the need for it.