Crimp Aid for AMP TE IDC Connector (24-pin | 1.27mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needing help crimping these small Amphenol connectors to an IDC flat ribbon cable. Please use this crimp aid
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 53
- Makes
- 2
- Views
- 713
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
While proceeding with the modification of my Prusa MK4 following bluex's MK4 LCD Quick release cable guide, I discovered that crimping these small red Amphenol IDC connectors was quite challenging.
As a result, I decided to design a helper tool to assist in crimping these connectors without causing damage with an external tool or injuring my hands.
Lock the male connector into the female crimp aid, then place the other part on top, and squeeze together with your hand until you hear a click indicating that the two parts of the connector are secured.
My final print settings
- After several strength tests, I finally settled on :
- 0.4mm nozzle,
- 0.1mm layer height,
- 40% infill,
- gyroid.
Remarks
- Since I own a 24-pin connector, I physically tested to ensure it fit with the correct tolerance.